cechevar

Members
  • Content count

    10
  • Joined

  • Last visited

Community Reputation

10 Good

About cechevar

  • Rank
    TT Newbie

Profile Information

  • Location
    California
  1. I was also checking out the White along with the Blue that Cemoto offers. I sent a note to a guy who sells Cemoto plastics in U.S. and he said he has three blue kits in stock but no white. He also said he plans on having the white soon. It may be worth sending him an email. Email is motoplasticsinfo@verizon.net.
  2. To add to redrocket190's response, there is a guy in the states that imports CEMOTO... http://www.motoplasticsus.com/
  3. I have also seen the Red/White Cemoto Graphics, the guy who has MotoPlastics website sent me a pic of a set he just mocked up on his 05 TE. You could probably email him off the website to check availability. He has all the 05 plastic in stock in multiple colors also.
  4. I have also seen the Red/White Cemoto Graphics, the guy who has MotoPlastics website sent me a pic of a set he just mocked up on his 05 TE. You could probably email him off the website to check availability. He has all the 05 plastic in stock in multiple colors also.
  5. The tabs should be perpendicular to the front surface of the radiator. They most likely are slightly bent in. You should be able to bend them back into position. As for the plastics, you may want to look at the MotoPlastics website. Prices seem to be lower than most. Here is the link. http://www.motoplasticsus.com/
  6. You can also checkout MotoPlasticsUS.com, they have plastics, levers, seat covers, etc....
  7. You can try www.motoplasticsus.com, he is in the US and has CEMOTO grapics and plastcis.
  8. There is a guy in CA that supplies CEMOTO products in US that has no minimum. I have used him and he is very responsive to any questions I have had. He has a website www.motoplasticsus.com. Hope this helps...
  9. I stumbled across a website with a number of parts for our Huskys. I sent an email and I was told they just received some products from UFO. I was also told they should be getting CEMOTO products shortly. Would be nice to have some products in the US. You may want to check it out. Does anyone have other parts suppliers they know of? New to Huskys and like doing my own work... His email is motoplasticsinfo@verizon.net and the web site is http://www.motoplasticsUS.com .
  10. I also had recently purchased a te450 with the light kit. It took a little time to figure out but I have successfully installed it with one minor detail. The setting for the WS (wheel circumfrance is off), I will try to get an accurate value from the wheel itself. That said the wiring harness is complete, there is a three prong plug underneath the tank which the kit harness plugs directly into. I did find that I had one wire swapped so the lights were on all the time. Just check that the Blue goes to Blue and the Yellow goes to Yellow/Red(if memory serves me). If you have any other questions let me know. Also, mine has the WRX for the tail light, it appears that these are some what of an after thought for US models, the parts catalog shows instructions(ie wiring diagram) hand written in.