Jump to content

timisadonkey

Members
  • Content Count

    44
  • Joined

  • Last visited

About timisadonkey

  • Rank
    TT Member

Profile Information

  • Location
    Alberta
  1. timisadonkey

    Help me!!!! Sand in oil.

    You don't think that the sandy oil that ran through the motor already damaged it internaly. Does anybody know they exact flow pattern of the oil.
  2. timisadonkey

    Help me!!!! Sand in oil.

    That was my plan but I am scared of blowing the motor up a month down the road in a race or flying down a trail and having a minor problem turn into a huge f up and some broken bones.
  3. timisadonkey

    Help me!!!! Sand in oil.

    I stalled my biken in maybe 6" of water. It never fell over or sucked any water in the air box. While trying to get it started again I'am asuming that I syphoned some water and sand up the oil case vent hose. It started and I ran it for about 2 min back to the truck sounded fine. Oil sight glass was a bright white so I knew I had got water inside. At home I drained the oil and felt for any debries while drainng nothing. Oil filter can out packed whith sand. Pulled off the ignition cove and and oil pump to find more sand. Am I dead? I am hoping that the oil hit the fliter before going through the engine. I pulled my engine out of the frame but I have not taken it to the shop yet. How bad is it?
  4. timisadonkey

    How long till Calgary, Lethbridge, the Hat or Brooks?

    Throw some studs on
  5. timisadonkey

    Oil leaking out of my top end.

    That would probably have being the problem thanks.
  6. timisadonkey

    Oil leaking out of my top end.

    I was ice racing and left my bike running as i hooked my tie down strap to the handle bars and leaned my bike over. Oil started pissing out of the top end seal. no strang noises and the bike was running great before. I drained my oil and there was almost 1.5L of oil so it was overfilled. Is it ok or should i take my baby to the doctor?
  7. timisadonkey

    Need more HP out of my 450

    Thanks guys for the input. The bike does have more than enough HP for mx racing i got a 07 for this year. I want to use my 06 for the sand. Pretty much just want to show up and lay the boot to everybody else racing in the sand.
  8. timisadonkey

    Need more HP out of my 450

    Hey guys whats up I got a 06 kx450f. I want to send my engine to get rebuilt and fully modified. Port polish, valuves cut the work to get the most HP i can get out of it. I live near Edmonton AB, CA, and I was hoping dombeody could tell me who does the best work
  9. timisadonkey

    Engine work, Where to go.

    Hey guys whats up. I want to send my 450 to get rebuilt and fulliny modified. Port polish, valuves cut the work to get the most HP i can get out of it. I live near Edmonton AB, CA, and I was hoping dombeody could tell me who does the best work.
  10. timisadonkey

    I need to cool this beast down

    do you know where I can find those PC hoses. I can't find them at the OC website
  11. timisadonkey

    Spongy front brakes

    my front brakes feel like crap when they get hot. I head you should change the fluid but i was wondering if there is a good bike brand or just and dot4 fluid
  12. timisadonkey

    I need to cool this beast down

    Hey guys what do i need to lower my operating temp. Where can i find good highflow after market hoses perferably with the built in Y. and what are you guys using for coolant.
  13. timisadonkey

    Hammerhead Designs Shift Lever

    I have size 13 tech 10s and i run a hammer head 20mm offset I think that was the best mod i have done on my bike.
  14. timisadonkey

    Favorite Handlebar Bend

    I am 6'4" and i use pro taper pastrana FMX bend. I think they are the highets out there. luv em.
  15. timisadonkey

    Why do people hate Reed?

    Reed should have won the AMA championship. RC got caught cheating. Rules are Rules. Reed was the most consistant rider all year. Reed is the King and his with is smoking hot.
×