Hi everyone, I have a 2001 YZ 426 that I have some carb flooding problems with. Symptoms are as follows:
-If I cut the engine, after about a minute, fuel comes out of one of the overflow tubes from the carb.
- If this happens, I need to kick the bike over about 50 times in order to clear it prior to it starting.
Things I've done to rectify the situation are:
-Changed the float level to reduce the amount of fuel being put into the carb.
-Used some grinding paste to get the fit with the needle valve as snug as possible.
Neither of these had any effect. Any suggestions? Cheers.