Jump to content

airtime101

Members
  • Content count

    6
  • Joined

  • Last visited

Community Reputation

10 Neutral

About airtime101

  • Rank
    TT Newbie

Profile Information

  • Location
    Ontario
  1. airtime101

    Can-Am Outlander 1000 EFI XT 2014

    The wife's machine.
  2. airtime101

    Can-Am Outlander 1000 EFI XT (2014)

    0 comments

    The wife's machine.
  3. airtime101

    Husqvarna FE 501 2015

    So fare the bike is great!
  4. airtime101

    Husqvarna FE 501 (2015)

    0 comments

    So fare the bike is great!
  5. airtime101

    Can-Am Outlander 1000 EFI (2014)

    0 comments

    Been to hell and back on this beast!
  6. airtime101

    Can-Am Outlander 1000 EFI 2014

    Been to hell and back on this beast!
  7. airtime101

    00 426 engine noise...please help!!!

    the 426 of 2000 has a key on the crank they changed it to a spline in 01. i just had the same problem (noise clank bang) and sure enough the crank nut was loos but, for your bike DO NOT JUST TIGHTEN UP THE NUT you need to take a look at the key ,if it is warn or shered off then you need to replace it. i have an 01 and did alot of research on this problem. i put in new rings and checked the valves threw her back together and so far shes as good as new(no more noise clank bang) hope this helps
  8. airtime101

    00 426 engine noise...please help!!!

    the 426 of 2000 has a key on the crank they changed it to a spline in 01. i just had the same problem (noise clank bang) and sure enough the crank nut was loos but, for your bike DO NOT JUST TIGHTEN UP THE NUT you need to take a look at the key ,if it is warn or shered off then you need to replace it. i have an 01 and did alot of research on this problem. i put in new rings and checked the valves threw her back together and so far shes as good as new(no more noise clank bang) hope this helps
  9. airtime101

    oil filter

    ive got a 01 yz 426 How much metal chips should I see in my oil filter after 3-5 hrs of bush riding or before every oil change? Just think im seeing to much steel or aluminum. I have aftermarket side casings and ive taken them off and cleared more of the sidewall as the clutch was clearly hitting and wearing away the cover.im still seeing these chunks a year later! Were is it coming from? I just put in new rings and all looked very good and clean valves are in spec clutch has lots of life left. I can’t figure it out! Any help or advice would be helpful and appreciated
×