Jump to content

tonybb

Members
  • Content Count

    5
  • Joined

  • Last visited

About tonybb

  • Rank
    TT Newbie

Profile Information

  • Location
    California
  1. yesterday i replaced my fork fluid. rg3 is the last people to touch my forks. the prbloem i noticed is after said and done with the service when i went to set my clicks on my forks i noticed that the top clicker on my right fork (yamaha says 1 is soft and 22 is hard) it never stopped at 22 i could of unscrewed the clicker all the way out well pasted 22. my questio is if i set it to 12 like rg3 says to do is it going to still work or do i have to replace the top cap on my fork?
  2. tonybb

    06 wr250 acceleration problem

    no it doesnt run good a steady throttle it sputters it only runs good if you down shift and slam the throttle im going to check right now what leak jet is in it and i will let you no
  3. tonybb

    06 wr250 acceleration problem

    thanks for all the help guys well i did what you guys told me to do. heres what happened first off i live at 2800 ft level and ride from that alttitude and above. i put the blue needle in my bike and the clip on the 3rd slot and a 165 main jet in. it helped out a lot but i still hestitade i little bit. is it possible my accelerator pump squirt is out of adjustment?
  4. if anybody can help me im lost. i consider my self a vary good machenic. my problem is my bike for the past 2 months right when i start it and let it warm up its cool as soon as i put a load on the engine (riding the bike) like half throttle in any of the gears its starts to spudder like its got an intake leak or water in the gas. but if you down shift and slam the throttle it takes off like a rocket. its got no intake leaks and no water in the gas. iv got jd jetting kit installed, accelerator pump cover, uni air filter, fmf complete power exhaust. also eventually if you keep riding the bike it will clean its self out. it just sucks when your riding cause the bike could be running good at the moment but you never no if its gonna screw you or got your back when your riding and you come up to that obsticle that could hurt you if you dont approch it right anybody please help thanks for all the help guys well i did what you guys told me to do. heres what happened first off i live at 2800 ft level and ride from that alttitude and above. i put the blue needle in my bike and the clip on the 3rd slot and a 165 main jet in. it helped out a lot but i still hestitade i little bit. is it possible my accelerator pump squirt is out of adjustment?
  5. has or does anybody no if you can adjust the exhaust cam on the 2006 wr250 or do you have to by a new yz exhaust cam? thanks
×