Jump to content

97dr650

Members
  • Content Count

    631
  • Joined

  • Last visited

About 97dr650

  • Rank
    TT Silver Member

Profile Information

  • Location
    Arizona
  1. 97dr650

    Diagnosing Non-starting DR650

    Sure the kill button isn't stuck the the off position?Push it once to kill the motor and push it again to start.Pushing it in kills the motor but stays there till you push it again to start.
  2. 97dr650

    DR650 ignition removal

    Underneath the gas cap there are numbers,those number are the code for the key cut. Ilco blank # X241 (also says suz18 on it)works ign,cap and helmet locks.
  3. 97dr650

    What is the difference between DR650s and se

    Ya tell that to the Ranger that gave my a ticket for no off road tag.I told the ranger that my bike is not a dirt bike but a street bike.He didn't want any of that.
  4. 97dr650

    NEW KEYS?

    ilco key number x241 is stamped on the left and SUZ18 on the right side of the blank.This is the blank the local locksmith made my spare with that I always use.
  5. 97dr650

    Hi all newbie here DR650

    Look here,good info: http://dr650.wikia.com/wiki/Potential_problems_to_be_aware_of
  6. 97dr650

    New dr650 owner, first post need help please.

    Looks like that stuff is for the levers/hand guards.Bike Bandit and others have a fiche for parts.Best to get a service manual,it show the routing for hose,cable and wiring loom.Look here for the download http://drriders.com/topic20.html
  7. 97dr650

    DR650 Netural Sending Unit Question

    Look here: http://www.advrider.com/forums/showpost.php?p=14659217&postcount=15
  8. 97dr650

    Is this a good price?

    If you buy it,you will need some suspension work,the stock set up is for about a 140-160 lb rider.Lots of info just have to research it.
  9. 97dr650

    DR650 Netural Sending Unit Question

    If you are going to replace the screws(you can use the same ones)make sure you use the same length.And do one screw at a time,there is a spring and a pin behind the cover,you don't want them falling out and into case.It is very easy to loktite them and/or safety wire the bolts.To a search as mentioned above.
  10. 97dr650

    Intentional hole in the frame? DR650

    Do not use a bolt,the chain will hit the bolt head.Set screw or a dab of silicone.I wouldn't leave the hole open.
  11. 97dr650

    Brand New DR650 - what to do?

    Remove the upper chain roller.Get a double bearing/sealed lower roller,the chain won't be so noisey
  12. 97dr650

    gsxr 600 exhaust

    Can you take a pic,would like see what the muffler looks like.
  13. 97dr650

    Busa/GSXR exhaust comparison on DR650

    I believe this is the one for the 40F0.Do a search for gsxr muffler install by MX Rob. https://www.denniski....prd/432780.sku
  14. 97dr650

    Gsxr 1000 & 2 brother Mid installed

    Plus it's alot lighter and no repack:
  15. 97dr650

    Handle bar width

    Take your pick,it's about the fourth one down: For those looking at getting replacement handlebars, here's a handy reference... Factory 909 Bend Width Height Pull Back CR Low Bend 31.60" 3.10" 2.30" GP Bend 31.02" 3.66" 2.28" National Bend 31.90" 3.70" 2.00" Suzuki OEM Bend 32.04" 3.11" 2.32" Team Bend 31.60" 3.80" 2.10" Team Tall Bend 31.60" 4.00" 2.30" Fly Racing Aluma-Steel Bend Width Height Pull Back ATV F Bend 29.76" 5.51" 4.05" CR High Bend 31.34" 3.50" 2.12" Kawasaki/Suzuki Bend 31.49" 2.79" 2.16" Mini Bend 29.13" 3.77" 1.65" Vintage Bend 33.07" 6.77" 3.54" Yamaha Bend 31.61" 3.62" 2.24" Longhorn Big Bars Bend Width Height Pull Back CR Low Bend 32.00" 2.80" 2.68" KX Bend 32.00" 2.80" 2.36" Mini Bend 30.00" 3.94" 2.53" RM Bend 32.00" 3.23" 2.87" Universal Bend 32.00" 3.39" 2.76" YZ Bend 32.00" 3.31" 2.95" MSR Carbon Steel Bend Width Height Pull Back ATV High Bend 31.50" 6.00" 3.94" ATV Low Bend 31.00" 4.00" 3.62" CR High Bend 31.63" 4.50" 3.80" CR Low Bend 32.13" 3.63" 3.50" CR Mid Bend 32.25" 4.25" 3.38" KX High Bend 31.50" 4.25" 3.07" KX Low Bend 31.88" 3.25" 3.38" Mini High Bend 28.50" 4.60" 2.36" Mini Low Bend 28.13" 3.71" 2.36" RM High Bend 31.88" 3.75" 4.13" YZ High Bend 32.25" 3.88" 3.75" YZ Low Bend 31.50" 2.64" 2.76" MSR Dominator Bend Width Height Pull Back ATV High Bend 31.50" 6.00" 3.94" CR High Bend 31.63" 4.50" 3.80" CR Low Bend 32.13" 3.63" 3.50" CR Mid Bend 32.25" 4.25" 3.38" KTM High Bend 32.72" 5.24" 2.14" KX High Bend 31.50" 4.25" 3.07" KX Low Bend 31.88" 3.25" 3.38" Mini High Bend 29.13" 5.88" 3.75" Mini Low Bend 28.125" 3.71" 2.36" RM High Bend 31.88" 3.75" 4.13" YZ High Bend 32.25" 3.88" 3.75" Moose Steel Bend Width Height Pull Back ATV High Bend 32.50" 5.00" 3.20" Pro-Taper Contour Bend Width Height Pull Back ATV High Bend 31.50" 4.75" 2.17" ATV Low Bend 31.50" 3.74" 2.37" ATV Mid Bend 31.50" 4.25" 2.21" CR High Bend 31.50" 3.74" 2.37" CR Mid Bend 31.50" 3.23" 2.24" Carmichael Bend 31.50" 3.00" 2.17" Factory Suzuki/KTM Bend 31.50" 3.63" 1.85" Henry/Reed Bend 31.50" 3.62" 2.24" KX High Bend 31.50" 4.25" 2.21" Mini High Bend 30.50" 3.74" 2.00" Mini Low Bend 30.50" 2.80" 1.85" Pastrana FMX Bend 30.50" 4.75" 2.17" Pastrana MX/RM Low Bend 31.50" 2.91" 2.17" Raptor Bend 30.30" 5.64" 3.41" Universal Low Bend 31.50" 2.80" 2.17" Windham MX/RM Mid Bend 31.50" 3.90" 2.13" Woods High Bend 30.50" 3.74" 2.45" Woods Low Bend 30.50" 2.80" 2.37" YZ High Bend 31.50" 3.31" 2.00" Pro-Taper EVO Bend Width Height Pull Back Carmichael Bend 31.50" 3.0" 2.17" CR High Bend 31.50" 3.74" 2.45" Henry/Reed Bend 31.50" 3.62" 2.24" RM Low Bend 31.50" 2.91" 2.17" Windham/RM Mid Bend 31.50" 3.90" 2.13" Woods High Bend 31.50" 3.74" 2.56" Pro-Taper SE Bend Width Height Pull Back ATV Low Bend 32.00" 5.50" 3.30" ATV Mid Bend 32.00" 5.90" 3.00" ATV High Bend 32.00" 6.30" 3.94" Carmichael Bend 31.50" 3.00" 2.17" CR Low Bend 31.50" 2.80" 2.68" CR Mid Bend 31.50" 3.23" 2.36" CR High Bend 31.50" 3.74" 2.45" Factory Suzuki Bend 32.00" 3.63" 1.85" Henry/Reed Bend 31.50" 3.70" 2.17" Honda Mini Bend 28.75" 4.60" 1.97" KTM 50 Bend 25.50" 3.15" 1.75" KX Low Bend 31.50" 2.80" 2.36" KX High Bend 32.00" 4.25" 3.07" Kawasaki Mini Bend 28.75" 3.71" 1.97" Raptor Bend 30.30" 5.63" 3.41" RM Low Bend 32.00" 2.91" 2.17" RM High Bend 31.50" 3.23" 2.87" School Boy High Bend 28.10" 3.46" 1.77" School Boy Low Bend 28.10" 3.07" 1.85" Suzuki Mini Bend 28.75" 4.00" 1.97" Windham/RM Mid Bend 32.00" 3.90" 2.13" XR50 Bend 28.50" 6.75" 1.75" YZ Low Bend 31.50" 2.64" 2.76" YZ High Bend 31.50" 3.31" 2.95" Yamaha Mini Bend 28.75" 3.90" 2.28" Renthal Bar Bend Width Height Pull Back ATV Honda/Suzuki/Kawaszki Bend 31.10" 5.59" 3.54" ATV Race (781-01) 31.73" 5.90" 2.95" Banshee Bend 30.51" 5.90" 3.93" 89-91 CR Bend 31.29" 3.74" 2.44" CR Bend 31.30" 3.74" 2.44" CR Mini Bend 29.13" 3.78" 2.68" CRF 150R Bend 30.7" 5.43" 1.65" Fourtrax Bend 30.31" 6.30" 3.86" KTM Mini Racer Bend 25.28" 3.31" 1.73" KX Bend 31.69" 3.66" 2.17" KX Mini Bend 26.57" 3.54" 2.68" KX/RM Mini Bend 28.82" 3.94" 2.48" LT-R 450 Bend 31.65" 3.50" 3.23" Mini Carmichael/Allessi Bend 29.13" 4.65" 1.65" Mini Racer Bend 30.20" 6.06" 2.76" Raptor 700 Bend 31.10" 5.55" 3.54" Raptor Bend 30.90" 5.51" 3.94" 96-01 RM Bend 31.49" 2.79" 2.55" RM Bend 32.05" 3.11" 2.32" RM Mini Bend 28.94" 3.54" 2.72" RMZ Bend 31.42" 2.91" 2.28" Suzuki Quadracer Bend 30.31" 4.72" 3.62" XR Bend 31.69" 3.43" 2.28" 04-05 YFZ 450 Bend 30.43" 4.33" 3.82" 06 YFZ 450 Bend 30.70" 4.17" 3.46" YZ Mini Bend 28.74" 4.06" 2.32" YZ/WR Bend 31.61" 3.62" 2.24" Renthal Fat Bars Bend Width Height Pull Back ATV Bend 31.29" 3.74" 2.44" CR High 31.29" 3.74" 2.44" Carmichael High Bend 31.57" 4.49" 2.13" R. Carmichael 31.57" 3.89" 2.12" J. McGrath 31.61" 3.62" 2.24" KFX 450R Bend 30.26" 3.78" 2.83" KTM 03 Bend 31.81" 3.27" 1.40" KTM 04 Bend 31.80" 3.74" 1.50" Mini Bend 29.13" 4.65" 1.65" Universal Low 31.41" 3.15" 2.24" Renthal Rider Bar Bend Width Height Pull Back Carmichael/Windham 31.57" 3.90" 2.13" J. Button-High Bend 31.77" 4.33" 2.63" McGrath Mini Racer Bend 29.13" 4.53" 2.09" McGrath/Lusk/Stewart 31.61" 3.62" 2.24" Renthal Twinwall Bend Width Height Pull Back CR High Bend 31.29" 3.74" 2.44" Jeff Emig Bend 31.69" 3.66" 2.16" Jeremy McGrath Bend 31.69" 3.26" 2.16" Kevin Windham Bend 31.61" 3.62" 2.24" Ricky Carmichael Bend 31.57" 3.89" 2.12" YZ Bend 31.92" 3.34" 1.41" Spiegler LSL Bend Width Height Pull Back BMW Bend 29.50" 2.38" 4.50" Street Bend 32.00" 1.75" 3.50" Street High Bend 33.50" 3.75" 3.50" Superbike Bend 30.00" 2.75" 6.00" Superbike High Bend 31.00" 3.50" 7.12" Superbike Low Bend 29.00" 2.00" 5.50" Sport Tourer Bend 26.75" 1.75" 4.38" Tag T2 Bend Width Height Pull Back CR Double High Bend 31.69" 4.53" 2.44" CR High Bend 31.69" 3.43" 2.28" CR Low Bend 31.30" 3.74" 2.44" KTM Bend 31.69" 3.90" 2.56" KX Bend 31.61" 3.35" 2.09" RM High Bend 31.69" 3.66" 2.17" YZ Bend 31.61" 3.62" 2.24" Tag X5 Bend Width Height Pull Back CR High Bend 31.30" 3.74" 2.44" CR Low Bend 31.69" 3.42" 2.28" Fourtrax Bend 31.10" 5.59" 3.35" KX Bend 31.61" 3.35" 2.09" RM High Bend 31.69" 3.66" 2.17" Raptor Bend 30.51" 5.90" 3.35" YZ Bend 31.61" 3.62" 2.24" YZ Double High Bend 31.50" 4.50" 2.25" Z400 Bend 31.10" 5.51" 2.95" Trail Tech ATV X-Bar Bend Width Height Pull Back Low Bend 31.10" 3.27" 2.44" Mid Bend 31.10" 3.74" 2.44" High Bend 31.10" 4.21" 2.44" Tusk Chub Big Bar Bend Width Height Pull Back ATV High Bend 31.5" 4.75" 2.41" CR High Bend 31.5" 3.75" 2.45" MX Race Bend 31.6" 2.8" 2.25" YZ Bend 31.6" 3.5" 2.38" Tusk T-10 Bend Width Height Pull Back ATV Sport Model Bend 31.75" 6.25" 3.50" CR High Bend 32.00" 3.75" 3.00" CR Low Bend 32.00" 3.25" 3.50" CR Mid Bend 32.00" 3.50" 2.50" KX High Bend 32.25" 4.00" 3.00" KX Low Bend 32.00" 3.50" 3.00" Mini Hight Bend 29.13" 4.50" 2.75" Raptor Bend 31.50" 6.25" 4.00" YZ High Bend 32.00" 3.50" 3.00"
×