Products > Electrical > Electrical Components > Stators & Coils > Accel Single Super Coil Kit for Universal Applications - 3.0ohms - Black (140405K)
veh4 UNIVERSAL PRODUCT What does this mean?

Accel Single Super Coil Kit for Universal Applications - 3.0ohms - Black (140405K)

Facebook Twitter

SKU: 140405K

RETAIL: $119.95
YOU SAVE: $12.00 (10%)


High-output coils ACCEL engineers designed these coils special low-resistance primary winding to match the operating characteristics of factory and aftermarket CDI systems Maximum performance with fast rise times Extra-heavy-duty 9 mm silicone wires included Made in the U.S.A. Using the wrong coil may damage your motorcycles electronic ignition module. To determine your ignition type, complete the following test: 1. Determine whether the type of coil you are replacing is a high tower coil. (These coils will NOT replace single tower coils.) 2. Using a volt meter or 12V test light, hook the positive lead to the positive post and the negative lead to the ground on one of the stock coils. 3. Turn the ignition on, but DO NOT engage the starter button. 4. If there are 12V at the coil, the motorcycle has an inductive type ignition. If there is no voltage at the coil, then the motorcycle has a CDI ignition because the power goes to the control box first. Ignition Type: Inductive Discharge For 2-cylinder models One coil kit
Stock photo shown, actual item may vary by model.

Add new paragraph   Close

While universal products are designed to fit a range of vehicles they may not fit all vehicles. If you are unsure of the fit we recommend posting a question on the ThumperTalk forums or contacting the manufacturer before ordering.