Products > Engine > Valve Train > Camshafts > Andrews 55N Conversion Camshafts (216855)

Andrews 55N Conversion Camshafts (216855)

Facebook Twitter

SKU: 216855

RETAIL: $298.95
YOU SAVE: $29.89 (10%)


Eliminate spring powered chain adjusters Engines converted to 2007 type cams and chain drives will have higher output due to less power loss from older spring powered chain tensioners. Instead of the original spring adjusters, new roller cam chains use engine oil pressure to maintain proper chain tension Camshafts on all 99-06 Twin Cam 88 engines (exc. 2006 Dyna) can be updated to new style roller chain drives Designed for use with stock H/D hydraulic lifters Installing 2007 roller cam chains on earlier engines requires series N Andrews camshafts Stock H-D parts are required: 2007 cam support plate, 2007 or later oil pump, cam sprockets and chains and both hydraulic chain adjusters Matching EZ-install pushrods kits are sold separately. EZ-install pushrods do not require removal of gas tanks or rocker boxes when installing bolt-in camshafts Great cam for 95in. with 9.8 to 10.2 C.R. Max HP - torque at mid and upper RPMs (2600 to 6200) Intake Opening (degrees): 22 Intake Closing (degrees): 46 Exhaust Opening (degrees): 52 Exhaust Closing (degrees): 20 Intake Duration (degrees): 248 Exhaust Duration (degrees): 252 Intake Lift (in): .550 Exhaust Lift (in): .550


This product is labeled to fit with the following vehicles:
Stock photo shown, actual item may vary by model.

Add new paragraph   Close

While universal products are designed to fit a range of vehicles they may not fit all vehicles. If you are unsure of the fit we recommend posting a question on the ThumperTalk forums or contacting the manufacturer before ordering.