Products > Control > Triple Tree & Clamps > Complete Triple Tree Kits > Arlen Ness KO 11deg. Raked Triple Tree (20-375)

Arlen Ness KO 11deg. Raked Triple Tree (20-375)

Facebook Twitter

SKU: 20-375

RETAIL: $899.95
YOU SAVE: $89.99 (10%)


These 11deg. billet triple trees will properly rake your Bagger for the use of 21in., 23in. and 26in. wheels. No cutting, welding or custom fabrication needed of any kind Extensively road tested, this kit is the best handling raked tree kit available. Attain close to stock handling with large diameter front wheels Designed exclusively for 21in., 23in. and 26in. diameter wheels, stock diameter wheels will not work with triple tree kit When using 21in. front wheel the trail is 4 1/2in., 23in. wheel trail is 5 1/4in. and when using 26in. front wheel the trail is 6in. Does not require modification of stock frame. Fairings also maintain stock position and does not require angled headlight wedges or special brackets to properly adjust headlights When using 23in. or 26in. front wheels on Road Glide models, a fairing bracket is recommended (sold separately) for increased fairing clearance Kit includes black anodized billet aluminum triple trees, steering stem, fork tube extension, fork stops, travel limiters and all necessary hardware Designed to fit all 97-13 FLT Touring models (except Road King) NOTE: Will not work with factory diameter wheels NOTE: FLHX, FLHT models require a new trim kit MFR # 20-376 NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry must be calculated to determine which degree of rake is most suited for your application. Trees with more than 3 deg. of rake should not be used in stock frame applications


This product is labeled to fit with the following vehicles:
Stock photo shown, actual item may vary by model.

Add new paragraph   Close

While universal products are designed to fit a range of vehicles they may not fit all vehicles. If you are unsure of the fit we recommend posting a question on the ThumperTalk forums or contacting the manufacturer before ordering.