Search the Community: Showing results for tags '250 xc'.
Found 4 results
Got a 2013 KTM 250 XC-W need some tire suggestions, I ride in Florida, Georgia and North Carolina. Yes I know those are very different areas to ride, but trying to find the best all around tires. Ride for fun, Muti-Day Enduros, single track, fire roads, gravel roads and some asphalt when going from trail to trail. Let me know what you like! I weigh about 200 pounds and am a senior rider and am an intermediate rider. Give me your suggestions... (Asking for my pops) Thank you...
I'm caught between a rock and a hard place. My 2010 KTM 250 XC won't stop peeing coolant out of the overflow tube. I've used 3 different radiator caps (two of the oem 1.8 bar caps and one CV4 2.0 bar) and it still continues to pee coolant as soon as the bike starts up. I just recently bought and installed brand new radiators [GPI on eBay for $88 (the seem fine just the welds are a bit crappy and you can see inside of the tubes where the metal from the welds drooped down but there are no blocks)] and silicone hoses (profactory hoses) thinking they were the problem since the old radiators were bent in like bananas. To my dismay that was apparently not the issue. I've had everything apart and looked at. Has brand new base gaskets, head gaskets, radiators, and radiator hoses. I've bled the radiators like the manual says and there are no bubbles like air leaking into the system or being in the system. The jetting is also perfect. The only thing I haven't changed out is the oem impeller in the water pump but it looks to be in great condition. Any ideas on how I can fix this problem before it gets worse? Also, has anyone else had this problem and figured out how to fix it? I ride it in mostly tight 0-10 mph trails and also some 10-20 mph trails.
Has anyone installed and used a Checkpoint impeller? I see dirt rider had an article about them and I've been curious about them. I've been having overheating problems recently and after spending well over $200 on brand new radiators I've discovered the radiators weren't the problem. So I bought new piston rings since they were out of spec (supposed to be like .15 and they were .5) and then thought about buying one of these aluminum impellers to help the problem instead of keeping the flimsy plastic one. I've read mixed reviews about them. Has anyone had any luck with them or is it basically just paying for the same overheating problems to happen?
I'm and intermediate rider who rides very aggressively and on hard, but fast-paced woods/cross-country/harescramble riding. Sometimes I'll do technical, really tight trails, log crossings, and hillclimbs, etc. and I also will ride motocross tracks every once in a while. I currently own a 2008 KTM 250 XC-F with a bigger rear sprocket, FMF exhaust, aftermarket piston, and I typically run high octane fuel. I won't be upgrading for quite a while but I am planning ahead trying to decide what to save up for and all that. I'm sure this forum will also help others in similar situations. I'd like something that can top out faster than my bike but something that can accelerate quickly and have more torque as well. The majority of my riding is very fast-paced woods with hard corners and lots of roots and steep hills as well, so I'd like something that can blow through corners and accelerate quickly. But, I also ride a lot of tight technical trails so I'd like something that's torquey and has explosive, yet controllable power and something I can take over big logs and rocks. I'm fine with a bike that likes to be revved a lot as that's what I do on my 250xcf now. I'm used to four strokes although I'll probably adjust to a two stroke very quickly as I ride constantly. I'm leaning towards a 250 XC or a 350 XC-F although I've heard lots about KTM's 125 and 150 2 strokes, the 450 and 500, the wide ratio "w" models of the cross country bikes, and their respective motocross models just because I know how explosive they are. I understand that this is a lot to ask out of one bike but I'm going to be adding a lot of aftermarket parts to whatever I end up getting if it doesn't already have any. Tell me all about these bikes if any of you guys have ridden them! I'm probably going KTM because I've heard nothing but good things about them but I will still consider any other brands as well. Tell me any aftermarket you had to do, improvements to be done or downfalls of each bike, and all their advantages and things they're better at than the other ones if you've ridden more than one of these. This is more of a harescramble/cross-country racing post, but since some of my races have parts of motocross tracks I'd like to hear how they do on the track. Also, money isn't too huge of a concern with me but I will definitely not be able to get a brand new bike. I will be racing so if it's bigger than a 250 then I'll have to be sure that it can compete with bigger bikes. Thanks, in advance!