Search the Community
Showing results for tags 'Advmonster'.
Found 2 results
0 commentsI've added over $4k of modifications to this cycle shortly after purchasing it. I'm intending this cycle to be a dual sport in purpose, and a USA BDR rider in particular. So, it will see freeway roads and speeds in excess of 75 MPH with hours of seat time slabbing it. It will also see sketchy two track and possible some single track, mud and for sure, some deep sand. So, *lots* of different conditions will be in view during the build, and as you consider the mods I make, please keep in mind my purpose for this cycle. Everything is a trade off, a compromise. Including cost. For instance, I did not / will not add a Rally tower or Rally type lighting. It's just too darned expensive for my purpose. But, I *am* big on protecting the cycle from hits and drops. So, I build out a layered approach to protection, with an eye on weight since I'll have to pick it up when I drop it. I'm also big on protecting *me* in these various environments. I can do something about the (my) body protection with various clothing armor pieces. I try to be seen, too. So, I'm big on lighting up the front, back and sides because drivers need to see me as best as I can make that happen. Sure, BDR riding does not need all that lighting. But, getting there and connecting the trail bits via roads *does* need it. So, it's on there. I referenced a lot of other folk's builds, picking out the pieces that I thought would be beneficial without adding too much weight, cost, or just too "blingy" for my taste. Kudos to Rocky Mountain ATV.com, and ADVPulse.com for their build descriptions. I also bought from KTM Twins.com, but I'm not very happy with that experience (returns take forever, and they dinged me for a lot of cash, for doing it). Probably not buying from them, if I can help it, anymore. Have a look...
1 reviewAbout the Model 44 Physical LED type: 4 pcs Cree XP-G2 Reflector: 4 position shallow draw Housing: Machined aluminum, black powder coat, openings sealed with orings to insure waterproofness. 55mm/2.2" diameter, 70mm/2.8" length. Mount: Stainless steel with a wide range of vertical adjustment. The mount locks in place with stainless hardware including nyloc nut. 6mm hole provides a secure mount to your choice of mounting locations with included 6mm nyloc nut. 25mm/1” square mount foot will mount to any flat location or stud. Lens: Hardened glass lens Light Performance Beam (degrees): 30 degree beam provides a wide field of view with good distance. Light output (lumens): 2000 Color Temperature (kelvin): 5500 Usable Light (feet/meters): 600/183 Electrical Wiring: One meter wire lead without connector. Sheathed lead provides resistance to rubs, scraps and other potential damage while maintaining waterproofness. Adequate length for mounting on lower fork. Power Draw (single light): 1.8 amps @12vdc or 22watts