Search the Community
Showing results for tags 'Lights'.
Found 7 results
-
Hey guys, been a frustrating day here and i do apologize if I'm posting in the wrong area. I'm more of a lurker to the point that i had to make a new account to even post here at all. My 74 honda xl350 blinkers and running lights don't work. Got a new battery and had it charged, checked all bulbs to be not blown and correct 6 volts, checked the one fuse this bike has and cleaned all the grounds i can find, can't find the frame ground anywhere, took apart and cleaned the blinker switch (also getting no power) verified that no blinkers/running lights are getting any power, and I'm losing my damn mind trying to figure this out. The only function I DO have is the high beam (indicator also not working, low beam burnt out) and the brake/aft running light. Any suggestions? I have a manual and I've been staring at a wiring diagram all day and I'm more confused than ever.
-
Hello guys I have a 2008 Honda xr650l I’m looking to install some led adventure lights on it my question is can anyone give me advice what the best place to wire into is? I was considering wiring into the blue and white ignition wire That is also the high low beam wire, it seems like a good candidate because when started switch is pushed it cuts power and also because i believe it will allow the lights to be on with both high and low beam. What are your guys thoughts can you confirm or deny any advice ?
-
1997 Honda Xr650L. I was changing out my turn signals. After each one I tested the turn signal...all good up till the 3rd turn signal. After the 4th and final turn signal was changed out everything is dead except my headlight. Brake light, turn signals, horn, dash indicators lights (except for headlight indicator) and rear light are dead. I check my fuses and all are good in the fuse area by the battery. Is there another fuse I’m missing? everything was working perfectly just before. I had a turn signal broken (bulbs are OEM....I do not have LEDs) and was trying to repair and change them all to the same style. I ordered pen replacement signals. -
Hey guys i have a 2009 ktm 530 exc, bike has 7500 miles and 190 hours, bike is often hard to start and sometimes starts on first kick?? wont start with electric start. It gets really hard to start almost impossible when warm, and during full throttle bike bogs really bad, also headlights and tail lights wont work. I checked the spark plugs connections and spark plug gap all is fine. Carb was cleaned nothing is dirty. Bike gets 13.8v on battery when running. I have no idea whats wrong it was running well not long ago
-
Hopefully some people out there with some experience with lighting and getting a drz 400 kick only model street legal. Recently picked up a '01 drz 400 (k1) kick only model, I'm looking to get some lighting wired up and im curious if the stock stator will be enough? What has anyone else out there done in regards to lighting, I have the left hand clip on with high beam low beam switch from an s model I'd like to incorporate, as well as the horn from an s model. I have the acerbis dot front headlight with hi and low beam with some additional LEDs, and a drc rear fender eliminator kit with the smoke lens. Any one have suggestions, advice, personal experience? Grateful for any imput!
-
I just recently purchased a 2011 250 xcw. My confusion is caused because it has silver wheels, a tail light, and a headlight. I can't find anything about how these are on the bike and I can't even find a set of the rims. I know the 12 came with silver rims but still not a headlight. Yes I know for sure it is aa xcw, I haveee the title.
-
Diagram Wire diagrams for Huskies, post what you got.
RJDJR1111 posted a topic in Husqvarna 4 Stroke
Its almost impossible to find a wire diagram online for my 2017 fe501. Im trying to replace my old fender eliminator with a new one and i cant find the wire diagram i had anywhere. And i tried just splicing wires together to see if they work but no luck and im sick of tinkering with it.
