Search the Community
Showing results for tags 'Plate'.
Found 3 results
2018 purchased with 40-53 hours on the stock motor, pistons, vavles, shims, transmission, everything; besides an aftermarket yoshimura slip on exhaust. Checked the vavle clearance before I road it and they were all in spec with suzuki's service manual. Let's move on. The bike was primary used for I dont know what. The last owner said he did some riding in the Oregon sand dunes. No idea if it was raced before that. My goal was to turn it into a road legal dual sport. I opted for a 2012 RMZ because they come with a dignostic port behind the front number plate mounted on the ECU that when kicked over provides a constant voltage of 13.50V to 14.50V ish. To power all the road legal stuff. Upon completion I replaced the hour meter with a Trail Tech Endurance 2 at 0 miles and 0 hours. Other then a stainless steel oil filter, changed spark plug, and cleaned air filter the engine remained stock. I commuted with the bike to work daily which is 3 miles there and 3 back on 40 mph roads. During lunch i ride for one hour about 15-20 miles on some wood trails. Blah blah blah. Fast forward some more and the bike has 90 accumalated hours total. I have not check the vavle clearance since getting the bike. Most of the riding was around 45-55 mph average for top speed to 35 everywhere else. My oil changes have been every 10 hours give or take how hard and how many miles I've driven. Changed with full synthetic maxima pro plus 10w40 oil. Air filter was cleaned once in between, from the time I got the bike till 90 hours........ lay it on me but wait till you finish this read. Okay so up to this time I'll reiterate that the engine is still stock. No top end rebuilts, no vavle shims, NOTHING! All OEM. At 90 hours I changed the gearing from the stock 13/49 to 15/49 since then I've added 15 hours on it with the same riding habits as before with my longest highway/freeway trip being 30 minutes at 18 miles mostly highway miles driven at or around 65Mph. Yeah she was screaming at that too, with a 5 speed gear box. It was sketchy even with that changed gearing. Blah blah again. Now I'm at 110 hours and 1500 miles on a still stock motor besides transmission gearing. My vavle spacing hasn't changed. And I decided to tear down the top end to see what I'm working with. Cylinder, piston, rings, conrod, vavles, spark plug, head, etc look okay with normal wear and tear. So in conclusion. I will order a forged piston to deal better with the higher rpms that I run at. BUT THAT AS FAR AS ENGINE MODS WILL BE IT. I haven't notice any power losses and love that gearing. It still works well down low. Now take it or leave it but this is an honest tracker from my level of riding and mechanicle knowledge. I'm not getting paid for this or influenced by a company or brand. I'm just posting this because there is, in my opinion no real knowledge posted about this topic but a lot of people are curious. Thanks.
Previous owner installed this. Extreme frustration trying to mount plate properly. So I engineered a proper adapter. Ya Ya, I know already, making a mountain out of a mole-hill, but you can't argue with the result. Probably thrown some paint on it or maybe print again in Black now that I know it works so well. Although white does not look bad since the plate is white anyway. Will eventually get new bolts for mounting and cut down the flat-head ones, after putting nylocks on. 3D printed from PETG, super tough material. Designed in Fusion 360.
Hey fellas I'm ordering some numbers for my bike for hare scrambles. I was wondering if you guys think 6" numbers will fit on the front number plate. I am number 102. I just don't know if I can fit 3 numbers on there.