Search the Community
Showing results for tags 'RonBlack'.
We're rebuilding the search index for faster, better results. Current results may not be complete.
-
1 review
GENERAL INFORMATION This modification is a great enhancer to all of your performance up grades and will give you an additional boost. I mill the surface and re-cut the squish band. This gives the 200"s more bottom end torque and a snappier rev. The 220's get a big benefit too, as they are low in the compression department. This will give a better pull through the mid-range and helps with top-end power. All of these mods are designed so you can still use premium pump gas. On request, I can give you even more compression for the serious engine builder. This will give more power and you will need to use race fuel.- 1 review
-
- Engine
- CylinderHeads
-
(and 1 more)
Tagged with:
-
1 review
GENERAL INFORMATION This NEW Keihin PWK OEM Style Carb is bored to 36 mm and comes complete with all of the KDX 200/220 mods that I perform on the stock carbs. The only thing that you will need to do is use your stock cable holder and cap, as the OEM Carb comes with a straight in cable adjuster, which will interfere with the frame. The curved KDX cap is unique to the KDX 200-220 This carb and modification was developed for people that have a badly worn carb that needs to be replaced or just want to purchase a new carb without sending their carb in for modification. This is a non air striker carb, and will flow more on the top end than the PWK Air Striker carb.- 1 review
-
- FuelAir
- CarburetorsAccessories
-
(and 1 more)
Tagged with:
-