Search the Community
Showing results for tags 'wireharness'.
Found 2 results
I am converting my 2005 Honda crf250r dirt bike into a street legal supermoto but have run into a problem. I used the tusk lighting kit and upgraded stator to do the conversion. Everything is working on the bike, turn signals, computer, taillight, on/off switch, ect. except the headlight!! I simply cannot figure out how to wire it to the tusk harness. Since its a race bike, it didn't have an existing headlight. The headlight I bought is the Poliosport Halo. Included are the diagrams to the headlight and the handlebar switch. If someone could explain how to go about wiring the headlight I would really appreciate it.
Can anyone provide some guidance in how to wire a KTM 250 xc-w for lights. I have already purchased a rear brake light and blinkers. My understanding based on some of the kits I have seen which I don't like because they include lights and blinkers that I do not want. These are the parts I have assembled but need the wire harness and a diagram on how it all connects to battery including any fuses or rectifiers or anything else I would need. I appreciate any help anyone can provide. Below are some of the parts I found: Motorcycle 2Pin 11-15V LED Turn Light Flasher Blinker Relay Signal Controller ($5.92) Motorcycle 2Pin 11-15V LED Turn Light Flasher Blinker Relay Signal Controller 6107931728455 | eBay Motorcycle Rear Set Hydraulic Pressure Brake Light Switch Banjo Cable 10x1.25mm ($7.99) Motorcycle Rear Set Hydraulic Pressure Brake Light Switch Banjo Cable 10x1.25mm | eBay 2pc lights Strip 6LED Baomabao Mini Strip Black led motorcycle Turn signal Universal Amber (1.99) put these in inside https://www.amazon.com/lights-Baomabao-motorcycle-signal-Universal/dp/B075WRKH8N/ref=sr_1_11?s=electronics&ie=UTF8&qid=1524592870&sr=1-11&keywords=turn+signal+motorcycle Dirt Enduro Bike LED Rear Fender Brake Tail Light Turn Signal Off-road For KTM(12.31) Dirt Enduro Bike LED Rear Fender Brake Tail Light Turn Signal Off-road For KTM | eBay Pair Universal 7/8' Motorcycle Handlebar Switch Horn Turn Signal Light Control(11.49) A Pair Universal 7/8' Motorcycle Handlebar Switch Horn Turn Signal Light Control 970232175893 | eBay 12V Waterproof Loud 105dB Universal Motorcycle Car Bike ATVs Horn Black (6.50) https://www.ebay.com/itm/12V-Waterp...651699&hash=item33e6a5501d:g:26YAAOSwEsRaxvq3. As you can see getting all the parts separately is a bit less that buying a kit which has parts I don't want. What I am missing here is the main wire harness to connect everything together and a diagram on how to do this. Also need to know where I need add fuses or anything else so I don't drain my battery. thanks for any help piecing this together. John